- EN
Rock wool lamella production lines transform mineral wool slabs into strips used as insulating cores in metal-faced sandwich panels. For panel manufacturers, consistent output depends not only on cutting and laminating equipment but also on the characteristics of the incoming rock wool.
This guide explains the key production stages, why fiber orientation matters, and which raw material properties should be reviewed before purchasing slabs or pre-cut lamella.
A typical process starts with rock wool slabs suitable for cutting into uniform strips. Depending on the line configuration, the main stages are:
Slab Feeding: Rock wool boards are transferred into the cutting section.
Strip Cutting: Slabs are cut to dimensions specified by the panel manufacturer.
Fiber Reorientation: Strips are turned approximately 90° so the predominant fiber direction is oriented substantially perpendicular to the metal facings.
Core Assembly: The strips are aligned to form the required core dimensions.
Bonding and Lamination: The prepared core is bonded to metal facings under controlled adhesive application, pressure, and curing conditions.
Inspection: Finished panels are checked against dimensional and performance requirements.
Actual processing steps vary according to equipment, adhesive systems, and panel design. Cutting accuracy alone does not guarantee the performance of a finished sandwich panel.
Rock wool is a fibrous material whose mechanical behavior depends partly on fiber orientation.
In conventional slabs, many fibers lie predominantly along the board plane. Cutting and rotating the strips changes their orientation relative to the finished panel facings.
This configuration can help provide the mechanical properties required in sandwich panel construction, particularly resistance to compressive and tensile forces. The core also transfers shear forces between the metal facings under bending loads.
However, mechanical performance depends on material structure, fiber orientation, bonding, and testing conditions.
Important: Mechanical test results for the original rock wool slab cannot automatically be treated as results for reoriented lamella or completed sandwich panels.
Density is an important specification when selecting rock wool for sandwich panel cores. It influences material weight and is associated with mechanical and thermal properties.
Compressive strength and tensile strength perpendicular to the original slab surface provide useful reference information, although higher density alone does not guarantee superior performance.
Consistent thickness, flatness, and edge quality support accurate cutting and alignment. Irregular dimensions can increase trimming requirements and complicate continuous production.
Thermal conductivity indicates a material's ability to conduct heat under specified test conditions. The finished panel's thermal performance also depends on thickness, joints, and construction details.
Reaction-to-fire classification, water absorption, and dimensional stability are additional material selection considerations.
The fire classification of a rock wool board must not be confused with the fire-resistance rating of a finished sandwich panel assembly.
Fiber diameter, shot content, and mineral composition provide supplementary quality-control information. These characteristics should be evaluated together with mechanical and thermal performance rather than independently.
Our LL-RWL series includes three nominal density grades for industrial insulation applications, including potential use in sandwich panel core manufacturing.
| Property | LL-RWL-80 | LL-RWL-100 | LL-RWL-120 |
|---|---|---|---|
| Nominal Density | 80 kg/m³ | 100 kg/m³ | 120 kg/m³ |
| Compressive Strength | ≥40 kPa | ≥60 kPa | ≥80 kPa |
| Tensile Strength (Perpendicular to Slab Surface) | ≥100 kPa | ≥150 kPa | ≥200 kPa |
Additional specifications listed in our general rock wool board technical data include:
Thermal Conductivity (25°C): ≤0.043 W/(m·K)
Thickness Tolerance: ±1 mm
Flatness Tolerance: ≤2 mm
Dimensional Stability: ≤1.0%
Reaction to Fire: Class A under GB 8624-2012
These values describe the general rock wool board specifications and should be verified against the applicable technical reports before use.
They do not establish tested mechanical properties for reoriented lamella cores or the performance of finished sandwich panels.
Sandwich panel manufacturers can select different supply formats according to their equipment and production requirements.
Full-size rock wool slabs are suitable for manufacturers operating their own lamella cutting and orientation equipment.
In-house processing provides flexibility over strip dimensions and allows manufacturers to integrate cutting operations into their existing production systems.
Pre-cut lamella offers an alternative for manufacturers seeking material prepared to specified dimensions.
Customers should confirm strip dimensions, tolerances, fiber orientation, packaging, and compatibility with their production systems.
Both supply formats require appropriate incoming material inspection and process validation.
Consistent raw material properties are important for continuous sandwich panel production.
Before purchasing, manufacturers should consider:
Density and dimensional consistency
Cutting and handling suitability
Mechanical properties and their testing directions
Thermal performance and fire classification
Compatibility with adhesive and lamination processes
Availability of technical documentation and customized dimensions
Manufacturers should also identify the performance standards applicable to their finished panels.
For reference, EN 13162 addresses factory-made mineral wool insulation products, while EN 14509 applies to factory-made double-skin metal-faced insulating sandwich panels.
Material-level specifications cannot replace testing or certification required for the complete panel system.
Technical note: Published performance values should be verified against the latest product test reports. The information provided does not constitute lamella-core certification or finished-panel performance approval.
